TEC1-12706 Peltier Module – precise, silent, and uncompromising thermoelectric cooling
Need to keep a component cool without noisy fans or complex plumbing? The TEC1-12706 Peltier module cools using pure semiconductor action — no moving parts, no vibration, and zero noise. The cold side drops significantly below ambient temperature, while the hot side dissipates the absorbed heat. All packed into a compact 40 × 40 mm footprint.
Note: Operating the module without a heatsink on the hot side will cause irreversible damage. Always mount a heat sink before powering it on.
Why choose the TEC1-12706 module? (Key advantages):
- 6A maximum current (vs 5A on the TEC1-12705) — delivers 60W of cooling power compared to 50W, achieving a greater temperature differential between sides
- Zero moving parts — completely silent operation, vibration-free, and a much longer lifespan than mechanical cooling solutions
- 2 thermal paste sachets included — ensures optimal thermal contact right from the start, with no extra trip to the shop required
- PWM control compatible — adjustable voltage between 0 and 15.2V allows for fine-tuning cooling power without sudden drop-offs
- Wide temperature range: -30°C to +70°C — performs reliably in extreme conditions, from portable mini-fridges to heavy-duty industrial setups
Details and Performance
Running at 12V and 6A, this module generates a thermal flux of up to 60W — plenty for cooling compact processors, CCD sensors, or laser diode housings. The built-in thermoelectric semiconductors guarantee steady and repeatable heat transfer without performance degradation over time, provided installation guidelines are followed. By simply reversing the polarity, the module transforms into a precise heating element — the exact same component, offering dual functionality.
| Parameter | Value / Detail |
|---|---|
| Model | TEC1-12706 |
| Dimensions | 40 mm × 40 mm |
| Operating Voltage | 0 – 15.2 V (12V recommended) |
| Max. Operating Current | 6 A |
| Max. Power | 60 W |
| Operating Temperature | -30°C to +70°C |
| Construction Type | Thermoelectric semiconductor (Peltier effect) |
| Moving Parts | None (silent operation) |
| Included Accessories | 2 sachets of thermal paste |
Package Contents
- 1 × TEC1-12706 Peltier Module (40 mm × 40 mm, 12V, 60W)
- 2 × Thermal paste sachets for optimal heat transfer
Frequently Asked Questions
Is a heatsink mandatory for the TEC1-12706 Peltier module?
Yes, absolutely mandatory. Without a heatsink on the hot side, the temperature climbs past the safety limit almost instantly, causing irreversible damage within minutes. Always use a heatsink with a fan for applications running at maximum capacity.
What is the actual difference compared to the TEC1-12705?
The TEC1-12706 handles 6A instead of 5A — meaning 60W of cooling power versus 50W. It achieves a wider temperature delta between the two faces, which is essential for projects requiring sub-zero cooling or a steep thermal gradient.
Can it also double as a heating element?
Yes. Simply swap the polarity of the power wires and the faces switch roles — the side that was cooling will start heating. One module, dual-purpose use.
Can I control the cooling output using PWM or variable voltage?
Yes. The module responds linearly to applied voltages between 0 and 15.2V. Using a PWM controller or an adjustable power supply, you can precisely dial in power consumption and thermal intensity — perfect for DIY thermostats or Arduino and Raspberry Pi projects.
Reviews
There are no reviews yet.