A 5-metre rubber edge guard that stops scratches before they happen
Tight parking spaces, an accidental door swing from a neighbour, or an unseen kerb — your car’s paintwork is constantly at risk. This rubber door edge guard with an internal metal insert clips directly onto the edge of your door, absorbing impacts before they reach your bodywork. You get a continuous 5-metre roll, which is plenty to cover all doors on a standard car or SUV.
Note: The product is supplied as a 5-metre roll in a matte black finish. It can be cut to your desired length and is fitted mechanically to the door edge, requiring no adhesives or special tools.
Why choose this model? (Key benefits):
- Instant impact protection — Absorbs minor knocks from other doors, walls, or parking pillars, keeping your paintwork pristine.
- Flexible metal insert — The strip follows the curves of your door edge perfectly and stays firmly in place, even through years of use or extreme temperature fluctuations.
- Triple-action sealing — Keeps out water, dust, and road grime, helping to prevent corrosion on the inner door edges.
- Improved sound insulation — Reduces road noise and vibrations entering through the door gap, especially noticeable at motorway speeds.
- 10-minute DIY installation — Simply cut to size with a utility knife and press into place. No glue, no mess, and no residue if you ever decide to remove it.
- Durable EPDM construction — Won’t crack, fade, or discolour. It is fully resistant to car wash detergents, UV rays, and temperatures ranging from -40°C to +120°C.
Details and Performance
The EPDM rubber used in this strip is the same high-grade material found in OEM automotive door seals — highly resistant to ozone, UV radiation, and repeated thermal cycles. The internal metal insert provides controlled rigidity: the strip moulds to your door’s profile during the first installation and maintains its grip through the heat of summer or the depths of winter. With 5 continuous metres, you can comfortably cover all four doors of a standard car, with enough left over for your boot or bonnet.
| Feature | Specification |
|---|---|
| Length | 5 metres (continuous roll) |
| Material | EPDM rubber with metal insert |
| Colour | Matte black |
| Temperature resistance | -40°C to +120°C |
| UV / Ozone resistance | Yes |
| Fixing method | Mechanical press-fit (no adhesive) |
| Compatibility | Universal – cars, SUVs, and commercial vehicles |
| Primary application | Door edge protection, sealing, anti-scratch |
What’s in the box
- 1 x Rubber door edge guard with metal insert – 5 metres
Frequently Asked Questions
Does it fit every car model?
Yes. The universal design and flexible metal insert allow it to adapt to the door edge profile of almost any car, SUV, or commercial vehicle, regardless of the manufacturer or year.
How do I install it?
Measure the length needed for each door, cut the strip with a utility knife or heavy-duty scissors, and press it firmly onto the door edge. The metal insert keeps it securely in place without the need for glue. The entire process takes about 10 minutes.
Is 5 metres enough for all doors?
For a standard 4-door car, you will typically need between 3.5 and 4.5 metres. The 5-metre roll covers all doors with extra material left over for your boot or bonnet if you want additional protection.
Can it be removed without damaging the paint?
Yes. Because the fixing is purely mechanical and uses no adhesive, it leaves no residue or marks on your paintwork or lacquer when removed.
Is it safe for high-pressure car washes?
Yes. The EPDM rubber is unaffected by water, car wash detergents, or high-pressure jets. The strip will not discolour or detach under normal usage conditions.
Product Video
Photo Gallery
Reviews
There are no reviews yet.