E27 Wireless Remote Control Lamp Holder – Switch off the lights without leaving your bed
The light switch is on the other side of the room. You’re already tucked into bed, settled on the sofa, or simply don’t want to get up. This E27 wireless remote control lamp holder is the perfect solution—allowing you to control any bulb in the room from up to 15 metres away, with no apps, no Wi-Fi, and no complicated setup required.
Note: The lamp holder installs directly into your existing light fitting, requiring no electrical modifications. Simply screw the holder into your socket, then insert your bulb. The remote control and radio receiver are included in the pack.
Why choose this model? (Key Benefits):
- 15-Metre Wireless Control — Turn your lights on or off from your bed, sofa, or anywhere in the room without moving an inch.
- 30 / 60 Minute Timer — Set the light to switch off automatically at bedtime so you never have to worry about leaving it on.
- Compatible with any E27 bulb — Works with LED (max. 50W), CFL (max. 50W), or incandescent (max. 100W) bulbs, including low-wattage 5W or 7W options.
- 30-Second Installation — Simply screws into your existing E27 socket. No tools, no electrician, and no wiring changes needed.
- Ideal for those with limited mobility — Provides genuine independence for the elderly or those who find moving around difficult.
- No Wi-Fi or Apps — Uses a stable, dedicated radio frequency signal that works instantly once paired.
Performance and Details
Communication is handled via wireless radio frequency, not Bluetooth or Wi-Fi. This means it doesn’t rely on your router, has zero latency, and won’t suffer from connection drops. The receiver is built directly into the lamp holder, while the compact remote can be kept on your bedside table, carried in your pocket, or mounted to the wall using the included adhesive strip. The fire-resistant plastic casing ensures safe, continuous use, and the programmable 30 and 60-minute timer switches the light off completely once the time elapses—no dimming, just a clean, reliable shut-off.
| Parameter | Value / Detail |
|---|---|
| Socket Type | E27 (Edison 27mm) |
| Max Power – LED / CFL | 50W |
| Max Power – Incandescent | 100W |
| Remote Range | Up to 15 metres |
| Timer Settings | 30 minutes / 60 minutes |
| Communication Type | Wireless radio (no Wi-Fi / Bluetooth) |
| Casing Material | Fire-resistant plastic |
| Operating Voltage | 220–240V AC / 50Hz |
| Remote Power | Battery (included) |
Programming and Usage Instructions
- Installation: Switch off the power, screw the E27 holder into your existing socket, and then insert your bulb into the holder.
- Pairing: Switch the power on—the holder will automatically enter pairing mode (the LED will flash). Press the ON button on the remote for 3 seconds until confirmed (steady LED).
- ON/OFF Control: Use the dedicated buttons on the remote to switch the light on or off from a distance.
- 30-Minute Timer: Press the T1 button—the light will switch off automatically after 30 minutes.
- 60-Minute Timer: Press the T2 button—the light will switch off automatically after 60 minutes.
- Cancel Timer: Press the OFF button to cancel any active timer.
Package Contents
- 1x E27 Lamp holder with integrated radio receiver
- 1x Wireless remote control
- 1x Battery for remote
- 1x Adhesive strip for wall-mounting the remote
Frequently Asked Questions
Does the lamp holder still work with the wall switch?
Yes. Your existing wall switch remains fully functional. The remote control adds an extra layer of convenience without replacing your current setup.
Is it compatible with low-wattage LED bulbs, like 5W or 7W?
Yes, it works with any LED bulb regardless of wattage, up to a maximum of 50W. Even very low-consumption bulbs are fully compatible.
Can one remote control multiple lamp holders simultaneously?
Yes. You can pair multiple E27 holders with the same remote by purchasing additional units. They will all respond to the same command at the same time.
Does the signal work through walls or closed doors?
The radio signal penetrates plasterboard and wood walls without issue. The 15-metre range is measured in open space; effective distance may vary slightly depending on your building materials.
Does the timer dim the light gradually or switch it off completely?
It switches the light off completely once the selected interval (30 or 60 minutes) expires. There is no built-in dimmer function.
Photo Gallery
Reviews
There are no reviews yet.