36W Amber LED Strobe Lights – Maximum visibility, day or night, for any vehicle
Whether you work on roadside assistance, construction sites, or operate emergency vehicles, high-visibility signalling is non-negotiable. It is not just about compliance; it is about safety. These 36W amber LED strobe lights are engineered for demanding environments where being seen is a priority.
Note: The price shown is for a complete set of 2 strobe lights.
Why choose these amber LED strobes? (Key Benefits):
- 36W per unit, 12 Samsung chips — Delivers a significantly brighter light output than standard 18W or 27W models; remains highly visible even in direct sunlight.
- 18 flash patterns with memory — Automatically saves your last selected pattern, so you don’t need to reconfigure it every time you start your engine.
- Native 12V / 24V / 36V compatibility — Works directly on cars, trucks, ATVs, and heavy machinery without the need for external adapters or resistors.
- IP67 rated — Fully dust-tight and water-resistant for up to 1 metre of submersion; built to withstand heavy rain and pressure washing.
- 10mm slim-profile anodised aluminium housing — Excellent heat dissipation for continuous use, with a sleek design that fits discreetly behind grilles or on bumpers.
- Simple 3-wire installation — Red to positive, black to ground, yellow for pattern switching; installation takes less than 15 minutes.
Performance and Build Quality
Each strobe unit features 12 high-performance 3W Samsung LED chips. We chose Samsung components for their superior light consistency and minimal degradation over their 50,000-hour lifespan. The amber warning colour is precision-calibrated to provide maximum contrast in fog, heavy rain, or bright daylight.
The anodised aluminium housing acts as a passive heatsink, keeping the LEDs at an optimal temperature even during prolonged use in summer conditions. Measuring just 10mm in depth and 112×41mm in size, these lights can be mounted discreetly behind a front grille, on side mirrors, or any flat surface.
With 18 distinct flash patterns—including single flash, double flash, and alternating sequences—you have the flexibility to choose the right warning signal for your needs. The built-in memory function ensures that your preferred setting is retained, providing a ‘set and forget’ experience.
| Parameter | Specification |
|---|---|
| Light Colour | Amber (Warning) |
| Total Power per unit | 36W |
| LED Count | 12 × 3W Samsung LEDs |
| Operating Voltage | 12V / 24V / 36V DC |
| Flash Patterns | 18 modes |
| Memory Function | Yes – retains last mode |
| Ingress Protection | IP67 (Water and dust resistant) |
| Housing Material | Anodised aluminium with heat dissipation |
| Dimensions (L×W×H) | 112 × 41 × 10 mm |
| Estimated Lifespan | 50,000 hours |
| Vehicle Compatibility | Cars, trucks, ATVs, motorcycles, heavy machinery |
| Package Contents | Set of 2 strobe lights + wiring |
Programming and Installation Instructions
- Connect the red wire to the positive (+) terminal of your power source (12V, 24V, or 36V).
- Connect the black wire to the ground (–).
- Power on the unit — it will start in the previously saved mode (or mode 1 for the first use).
- To change the pattern, briefly touch the yellow wire to the red (+) wire; each brief contact advances to the next of the 18 available modes.
- The mode active when the power is switched off is automatically saved.
- Repeat step 4 until you reach your desired flash sequence, then leave the unit to operate.
Package Contents
- 2 × 36W Amber LED Strobe Lights (12 × 3W Samsung chips)
- Integrated wiring (red, black, and yellow wires per unit)
Frequently Asked Questions
Do these work directly on 24V trucks or machinery?
Yes, no adapter is required. The strobe lights are natively compatible with 12V, 24V, and 36V DC systems—simply connect and go.
How do I change the flash pattern after installation?
It is simple: briefly touch the yellow wire to the red wire. Each touch cycles to the next of the 18 patterns. The selected mode is saved automatically even after the power is cut.
Will they fit behind my front grille?
Yes. With a depth of only 10mm and a footprint of 112×41mm, they are designed to fit discreetly behind most vehicle grilles, on bumpers, or on side mirrors.
Are they resistant to car washes or heavy rain?
Yes, the IP67 rating ensures they are fully dust-tight and protected against water immersion up to 1 metre for 30 minutes. They are perfectly suited for heavy rain and standard pressure washing.
Product Video
Photo Gallery
Reviews
There are no reviews yet.