Dynamic Flowing Water LED Indicators – Be seen, stay safe
Urban traffic can be unpredictable. If other road users don’t spot you in time, the risk at every junction increases. These dynamic LED indicators with a ‘flowing water’ effect change the game—the light doesn’t just blink; it flows sequentially through all 12 SMD LEDs, grabbing attention instantly, whether it’s day, night, or raining.
Note: This set is compatible with a wide range of voltages (36V, 48V, 52V, 60V, 72V DC), making it suitable for most electric scooters, e-bikes, and electric motorcycles.
Why choose this model? (Key Advantages):
- Instant-visibility flowing effect — Light flows sequentially through 12 amber SMD LEDs rather than flashing flatly like a standard bulb, ensuring drivers behind you react faster.
- 36V–72V DC Compatibility — Works seamlessly on any electric scooter, moped, or motorcycle, regardless of your battery voltage.
- IP67 Protection — Fully sealed against water and dust. Built to withstand heavy rain and can even handle moderate pressure washing.
- 6W High-Brightness — Clearly visible even in direct sunlight; you don’t need to rely on darkness to be noticed.
- 10-Minute Installation — Features a standard 10mm mounting bolt and pre-installed 39cm wiring. No professional electrician or specialist tools required.
- Dual Function: Indicator + Position Light — The third wire (red) allows you to use them as permanent running lights, not just for signalling.
Performance and Build Quality
The polycarbonate (PC) lens is impact-resistant and won’t yellow over time, while the ABS housing maintains its integrity even in extreme temperature fluctuations. The 3-wire connection (black, blue, red) gives you complete control: dynamic flowing-water signalling when you indicate, and optional continuous position lighting via the red wire. Designed for true compatibility with virtually any two-wheeled electric vehicle on the market today.
| Parameter | Specification |
|---|---|
| Package Contents | 2 x Dynamic LED Indicators |
| LED Type | 12 x Amber SMD, high-brightness |
| Function | Dynamic flowing-water signal |
| Supported Voltages | DC 36V / 48V / 52V / 60V / 72V |
| Power | 6W |
| Protection Rating | IP67 (water and dust resistant) |
| Material | PC Lens + ABS Housing |
| Dimensions | 12.3 x 3.65 x 2.9 cm |
| Cable Length | 39 cm (pre-installed) |
| Mounting | Standard 10 mm bolt |
| Wiring | 3-wire (Black – Ground, Blue – Signal, Red – Position) |
Installation Guide
- Disconnect your vehicle’s battery before performing any electrical work.
- Secure the indicators to your mounting point using the included 10mm standard bolt.
- Connect the black wire to the negative terminal (ground).
- Connect the blue wire to the positive signal circuit (flasher).
- Connect the red wire to a continuous power source if you wish to use the permanent position light function (optional).
- Reconnect the battery and test both indicators.
- Seal all connections and secure the cables with zip ties to prevent damage during transit.
Package Includes
- 2 x Dynamic flowing-water LED indicators
- Pre-installed connection cables (3-wire, 39 cm each)
- Standard 10mm mounting hardware
Frequently Asked Questions
Will these work on my 48V scooter?
Yes. This set supports any voltage between 36V and 72V DC, including 48V, 52V, and 60V. If your electric vehicle operates within this voltage range, these indicators are fully compatible.
Can I use them as running lights?
Yes. By connecting the red wire to a continuous power source, the LEDs will remain illuminated at a lower intensity. When you activate your indicator, they will automatically switch to the dynamic flowing-water mode.
Are they waterproof? Can I wash my scooter with them on?
The IP67 rating means they are protected against complete immersion in water up to 1 metre for 30 minutes. Heavy rain and moderate pressure washing will not affect their performance.
Is the 39cm cable long enough for my scooter?
For most compact scooters and e-bikes, yes. If you have a larger vehicle or are mounting the indicators further away from the controller, you can easily extend the wires by soldering and using heat-shrink tubing.
Product Video
Gallery
Reviews
There are no reviews yet.