LED FLOW DRL Strips with Sequential Indicators — Premium styling without opening your headlights
Want that high-end dynamic indicator look found on luxury vehicles without the hassle of dismantling your headlight units? This set is the perfect solution. You get two flexible 60 cm LED strips that can be installed in just 20 minutes—no professional electrician or complex headlight modifications required.
Note: These strips are designed for external mounting—simply place them along the edge of the headlight, in the gap between the headlight and bumper, or between the headlight and bonnet. There is no need to open the headlight housing.
Why choose this model? (Key Advantages):
- Uniform lighting, no visible hotspots — The silicone tube diffuses the light continuously, hiding individual LEDs for a seamless, premium glow even when viewed up close.
- Sequential LED FLOW effect — When you indicate, the light flows in the direction of your turn, mimicking the dynamic indicators on the latest Audi or BMW models.
- 480 lumens per strip — Provides excellent visibility during the day without dazzling oncoming traffic.
- IP65 certified — Fully resistant to direct water jets, dust, and extreme temperatures. They are perfectly safe for use in automatic car washes.
- Trimmable every 3 LEDs — If your headlight is shorter than 60 cm, you can easily trim the strip to the exact length you need without losing any functionality.
- Tool-free installation — Features pre-applied high-strength double-sided adhesive and clearly colour-coded wiring: red, black, and yellow.
Details and Performance
With a profile of just 4 mm thick, these strips fit into tight gaps where standard strips simply won’t go. The flexible silicone conforms to any headlight curve without cracking or peeling. The 2835 SMD LEDs provide an automatic transition between cool white for DRL and amber yellow for indicators, triggered by your vehicle’s electrical signal—no extra relays or programming needed.
| Parameter | Specification |
|---|---|
| Length x Width | 60 cm x 1.2 cm |
| Height (thickness) | 4 mm |
| Material | Flexible silicone |
| Supply Voltage | 12V DC |
| Water Resistance | IP65 |
| LED Type | 2835 SMD |
| Luminous Flux | 480 lumens / strip |
| Light Colour | Cool White (DRL) / Amber Yellow (Indicator) |
| Functions | DRL + Dynamic Sequential LED FLOW Indicator |
| Trimmable | Yes, every 3 LEDs |
| Compatibility | Universal — any 12V vehicle |
Installation Instructions
- Clean the mounting surface thoroughly with isopropyl alcohol and allow it to dry completely.
- Position the strip along your chosen path (headlight edge, bumper gap, or bonnet gap) and measure the required length.
- If the strip is too long, cut it at the clearly marked points (every 3 LEDs).
- Peel off the protective backing from the adhesive tape and press firmly onto the surface for 10-15 seconds.
- Connect the red wire to the headlight positive or ACC ignition (+).
- Connect the black wire to the chassis ground or battery negative terminal (-).
- Connect the yellow wire to the indicator wire for that side (left or right).
- Test: The strip should glow cool white when the ignition is on and switch to the sequential yellow flow when the indicator is activated.
Package Contents
- 2 x Flexible LED DRL Strips with Sequential LED FLOW Indicators, 60 cm
- Integrated connection cables (red, black, yellow) per strip
- Pre-applied double-sided adhesive tape
Frequently Asked Questions
Do I need to open the headlight to install these?
No. These strips are mounted externally—along the headlight edge, in the gap between the headlight and bumper, or between the headlight and bonnet. Your headlight remains completely intact.
Can I shorten the strip if my headlight is smaller than 60 cm?
Yes. You can trim the strip at the marked points, every 3 LEDs. The remaining segment will function perfectly, including the sequential effect.
What does the LED FLOW effect look like?
The LEDs light up one after another in a progressive sweep in the direction of your turn. It provides the same dynamic indicator effect seen on modern Audi, BMW, and Mercedes vehicles.
Are they resistant to automatic car washes or high-pressure jets?
Yes. The IP65 rating ensures full protection against dust and water jets from any direction. Standard car washes will not affect them.
Will these work on any car?
They work on any vehicle with a 12V DC electrical system—which covers virtually all standard passenger cars. They connect directly to your headlight, ground, and indicator wires without the need for special adapters.
Presentation Video
Photo Gallery
Reviews
There are no reviews yet.